Daiwa MARINEPOWER-3000 - Manual (Page 15)

13
10. As indicated by the line's color coding, wind the line up until
the remaining 200 m of line is identified.
12. Paying close attention to the line's color coding, wind the line
up until the remaining 100 m of line is identified.
9.
Press RESET BUTTON .
11. Press RESET BUTTON for 2 seconds.
The lower counter shows 100 .
13. Press RESET BUTTON for 2 seconds.
The lower counter shows 200 .
Attention
1. Do not wind the end of the line onto the spool because it causes incorrect length
calculation. Move the power lever to MIN, and wind manually when nearing the end of
the line.
Line data input
(With backing line)
8.
Tie the backing line securely to the main line. 8
9
10
11
13
14
Main line
Power lever
Backing line
Tie
blink
14. Wind remaining 100 m of the line. Then press and hold down
the RESET BUTTON 2 seconds or longer.
When 0.0 m appears on the display, the setting is completed.