Daiwa MARINEPOWER-3000 - Manual (Page 19)

17
You can recalibrate the counter should it not indicate an accurate depth compared to depth markings
on your line.
Example below is the case in which, though the counter shows
103 m, color markings on the line indicate 100 m.
3. After 100.0 is reached, press the INVERSE COUNTER
BUTTON two more times to return to depth display.
With this procedure, the inverse counter is reset. In the revised
display, pressing of the RESET BUTTON changes the reading
back to the unrevised value.
2. Move the power lever to change the displayʼs reading to 100.0 .
(Occasionally, for the revision rate, the exact number cannot be
attained.)
Functional setting operation
(3.Display recalibration mode)
1
2
3
recalibration disply
1.
Press the INVERSE COUNTER BUTTON for 3 seconds.
(The Value Correction indicator will appear.)
Up
DOWN