CANOGA PERKINS 9155 Network Interface Device - Manual (Page 36)

Table 10. Port Information Menu Options
Option Description
1. View Module Select the group of SP or MP modules
2. Port Information View the information and set values for parameters for a selected port
2. Port Statistics View the statistics for a selected port
MP8 CONFIG/STATUS
Model Number : 9508-330
Model Description : MP 10/100/1000 UTP Interface
Serial Number : 20031122137
Model Revision : A2
Link Status : Link Up
Remote Fault Status : None
Physical Status :
1. Change Port : MP8
2. Admin Mode : enable
3. Flow Control : disable
4. Link Trap : enable
5. Physical Mode : AutoNeg
6. LACP Mode : enable
7. Network Led : off
8. Remote Fault : disable
Figure 30. Port XP x Config/Status Screen
SP 4 STATISTICS
RECEIVED TRANSMITTED RX & TX FRAME SIZES
Total 7462 146483 =64 115723
UCast 1645 22422 65- 127 36496
MCast 654 9873 128- 255 12300
BCast 5163 114488 256- 511 10025
TotErrs 0 0 512-1023 3122
CRCErrs 0 0 1024-1518 924
Ovrsize 0 0 1519-1522 7
Undsize 0 0 1523-2047 7
Discrds 0 0 2048-4095 0
SingCol 0 4096-9216 0
MultCol 0
ExcsCol 0
LateCol 0 1. Change Port : SP4
Jabbers 0 2. Clear Counters
AlgnErr 0
Figure 31. Port XP x Statistics Report
9155 Network Interface Device 4-20