CANOGA PERKINS 9155 Network Interface Device - Manual (Page 22)

4.5.2 Module Information Screen
The Module Information report provides status for the 9155 and the installed modules. To access the
Module Information screen, see Figure 8 and follow these steps:
MODULE INFORMATION
Fan Status : All 3 Fans are OK
Temperature Status : OK (below 70 degrees C)
Slot 1 Power Supply Status : AC PS is functioning
Slot 2 Power Supply Status : PS slot is empty
Single Port Module 1 Status : 9500-330
Single Port Module 2 Status : 9500-330
Single Port Module 3 Status : 9501-528
Single Port Module 4 Status : 9501-528
Multiple Port Module Status : 9508-330
1. Main Menu
Figure 8. Module Information Screen
4.5.3 IP Settings Screen
The Functional Configuration report and menu provide information about and options to set control
functions. To access the Functional Configuration screen, see Figure 9 and Table 4 and follow these
steps:
1. From the System menu type 2 , "IP Settings," and press .
2. At the IP Settings screen, type the number for an item and press , then press to
cycle through the options and press to select an option.
3. To return to the System menu, press .
IP SETTINGS
Local MAC Address : 00 00 00 06 01 00
1. Local IP Address : 172.16.3.34
2. Subnet Mask : 255.255.0.0
3. Gateway IP Address : 172.16.1.1
4. Enable BOOTP Mode : no
5. Management VLAN Id : 1
6. Telnet Host Verification : disabled
7. Static ARP Table
8. Dynamic ARP Table
9. Main Menu
Figure 9. IP Settings Screen
9155 Network Interface Device 4-6