CANOGA PERKINS 9155 Network Interface Device - Manual (Page 33)

SP 1 STATUS
Port Identifier : 32769
Port Priority : 128
Port Forwarding State : Manual Forward
Port Role : Disabled
Port Path Cost : 0
Designated Root : 80 00 00 40 2a 01 10
Designated Port Cost : 0
Designated Bridge : 80 00 00 40 2a 01 10
Designated Port Identifier : 0
Topology Change Ack : False
Port Hello Time : 2
Edge Port : False
Edge Port Status : False
Point to Point Mac Status : True
Figure 25. Global Spanning Tree Interface XP x Status Screen
4.6.4 Lag Configuration
Use the Lag Configuration and Information screen to view and set Link Aggregation Protocol (Lag)
parameters for the 9155. See Figure 26. To access the Lag Information screen, follow these steps:
1. From the Switch Configuration menu, type 4, "Lag Configuration," and press .
2. At the Lag Configuration screen, type the number for an item and press , then type the
port number and press to select an option.
3. To return to the Switch Configuration menu, press .
LAG CONFIGURATION
CONFIGURED LAGS
1. Static Capability : disabled
2. View/Change Lag :
3. View Lag Stats :
4. Create Lag :
5. Delete Lag :
5. Main Menu
Figure 26. Lag Configuration Screen
4.6.5 VLAN Configuration
Use the VLAN Configuration screen to view and set VLAN parameters for the 9155. To access the
VLAN Configuration screen, follow these steps:
1. From the Switch Configuration menu, type 5, "VLAN Configuration," and press .
2. At the VLAN Configuration screen, to view or set up VLAN information, type 1 , 2 , 3 , 4 , or 7
and press , then follow the prompts on the screen. See Figure 27 and Table 9.
3. To add or remove a VLAN, type 5 or 6 and press , then follow the prompts on the screen.
9155 Network Interface Device 4-17