CANOGA PERKINS L351 10/100BASE Media Converter User Manual
Page 48
EdgeAccess Universal Chassis System
4-24
L351 10/100BASE Media Converter
Table 4-6. Security Configuration Option Definitions
Menu Item
Description
1. Minimum Length
2. Minimum Alpha Characters
3. Minimum Numeric Characters
4. Minimum Punctuation Characters
5. Maximum Consecutive Character Types
6. Maximum Same Character
Define characteristics of passwords; the range for
all fields is from 0 through 15
7. Allow username in password
Enable or disable the username appearing as or
within the password
8. Password Expiration Time
Set how often in days, 1 through 365, that the
passwords must be reset; 0 = disabled
9. Password Reuse Count
Set whether the password must be changed or can
be used again immediately. Values are 0 to 8. 0
means the new password can be the same. 1 to 8
specify how many times the password must expire
before a specific password can be used again.
10. Lockout After Failed Attempts
Set how many times, from 1 to 10, that a user can
try to log in before a lockout; 0 = disabled
11. Lockout Type
Lockout time
Set the type of lockout: Hard requires another
user with admin access to unlock the account on
the User Accounts screen; Timed requires that the
user wait for Lockout time before trying again;
Lockout time is from 0 (none) to 30 minutes
12. Display Lockout Message
13. Lockout Message
Enable or disable and set the message, up to 30
characters, that appears at lockout
14. Lockout Craft Port
Disable access to the serial port to prevent any
unauthorized access; to re-enable the craft port,
run a Telnet session
15. Inactivity Logout time (mins)
Set the time, between 1 and 30 minutes, before
automatic log-out with no activity; 0 = disabled
4.5.6 Account Configuration Screen
The Account Configuration screen provides options to set values for parameters for specific users
(see Figure 4-21, Figure 4-22, and Table 4-7) To access the Security Configuration screen, follow
these steps:
1. From the System Configuration menu type 7, Account Configuration, and press
2. To add a user, type A, or to edit an existing user, type E, and press
3. On the Edit User Account screen, type the Username, then follow the prompts at the bottom
of the screen to enter values, or press
parameters.
3. To delete a user, type 2, then follow the prompts to select the user name and confirm the
choice; the User Accounts screen reappears.
4. To return to the System Configuration menu, press