Canon PC-D320 - Manual (Page 57)

5-15
5
5
Ma
k
ing
Co
pi
es
■ Reserve Copy
This feature allows you to reserve the next job while the machine is printing out a current job.
■ Reserving the Next Copy Job
1 Press Stop/Reset twice while the machine is printing out.
• Make sure that the machine has finished scanning all the documents, then press
Stop/Reset .
• It is necessary to return to the standby display in order to reserve the next copy job.
2 Load the document to be reserved face up in the ADF or place it face down
on the platen glass.
3 Set copy features if you wish.
You can set the features below.
• Copy quantity (
→ p. 5-3)
• Enlarging/reducing ( → p. 5-5)
• Image quality (
→
p. 5-7)
• Exposure ( → p. 5-8)
• Collate ( → p. 5-9)
• 2 on 1 (
→
p. 5-12)
4 Press Start .
• The machine begins scanning.
• After printing of the current copy job is complete, the next copy job begins.
• If the machine’s memory becomes full while scanning,
MEMORY FULL and PRESS OK KEY appears in the LCD. When the ADF is
used for scanning, the document being scanned stops in the ADF. In this case, press OK to make the document come out automatically.
All of the scanned documents will be erased if MEMORY FULL and PRESS OK KEY appears, so divide the document and copy each
part separately, or select a lower image quality mode and make copies again.
• If the available memory decreases, PLEASE WAIT and MAKING SPACE IN MEM are displayed alternatively. If memory space
becomes available, the scanning begins again automatically. Also, check that the cassette or multi-purpose tray is not empty.
Ex:
100% A4
TEXT
01