Canon PC-D320 - Manual (Page 100)

B-2
2 Remove the screws from the plugs and insert the plugs into the holes on the
handset cradle.
3 Insert the plugs (with the handset cradle) into the holes on the unit.
• If you have difficulty inserting the plugs, turn the unit so that the left side is facing
you and the right side is against a wall. You can now insert the plugs without the unit
moving.
4 Use your finger to push the screws into the plugs.
• If you have difficulty, use a cross-point screwdriver to push the screws all the way
into the plugs. (Do not screw them in as the screws may break.)
• Make sure you support the unit when inserting the screws.