beautypg.com

WEATHER GUARD Model 287-3-01 EZ-GLIDE® Drop Down Kit, Mid-Roof, Driver Side User Manual

Page 12

background image

(3) 3/8" Flat
Washer

5/16-18 x 4-1/2"
Hex Hd. Bolt

(A)

STEP 12
Insert Aluminum Bushing (A) into the Rear
Cross-Member Assembly (B). Attach back of
Cylinder (C) to crossmember by installing the
5/16-18 x 4-1/2" Fastener.

NOTE: After in-

stalling Bolt, apply Loctite 290 to threads,
then install the nut.

(C)

5/16-18 Nylon
Lock Nut

(B)

CYLINDER INSTALLATION

Cotter Pin

1"Clevis Pin

NOTE: Turn the Flow Control
counter clockwise to release
pressure. Adjust Flow Con-
trol Screw Per Instruction
Decal On Handle Tube after
final assembly and installa-
tion.

STEP 13
Attach front of Cylinder as shown. Bend over
Cotter Pin after inserting it through Clevis Pin.

NOTE: Vehicle mounting
not shown for clarity