WEATHER GUARD Model 224-3-01 Aluminum Quick Clamp Rack, Dual Side - Manual (Page 4)

4
Dimension "A" - Stand
placement ahead of rear
edge of roof
Astro/Safari - 3"
Windstar - 1-1/4"
"A"
Figure 6. Stand Placement
"A"
"B"
3. Adjust then tighten the Stand As-
semblies to the following dimensions:
Chevy Astro/GMC Safari:
Front Crossmember "A" - 1-1/16"
"B" - 56-7/8"
Rear Crossmember "A" - 5-7/8"
"B" - 47-1/4"
Ford Windstar:
Front & Rear Crossmember:
"A" - 7-5/8"
"B" - 43-3/4"
Dimension "A" should center the Stands
side to side. Adjust both Stands accord-
ingly if they are not even.
4. With the help of others, lift the rack and
position it on the vehicle. Locate the rear of
the rack on the roof centered side to side
at the dimension shown at right. Mark
through the obrounds in the Mounting
Brackets at the point where the Mounting
Bracket radius meets the roof.
Figure 5. Stand Adjustment
Gap between Door and Roof