WEATHER GUARD Model 9010-3-01 Cab Command Center, 7-1/2 in - Manual

INSTALLATION MANUAL
Cab Command Center
Model Number 9010-3-01
WWW.WEATHERGUARD.COM
VAN STORAGE SOLUTIONS
FOR THE WAY YOU WORK TM
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
*24-0325*
Part No. 24-0325 REV. B
1
PLAN YOUR VAN (TIPS FOR FASTER INSTALLATION)
• Check fit of Cab Command Center side to side between the seats and front to back between the
bulkhead and dashboard/console before drilling mounting holes.
• Before drilling for the blind fasteners, check for fuel tanks, fuel lines, brake lines, electric wires, etc. to
avoid cutting or puncturing them.
• Power is faster — use an air or electric driver to assemble and install.
TOOLS REQUIRED
• 7/16 socket and driver
• 7/16 wrench
• 9/16 wrench
• drill, air or electric with 5/16 bit
• utility knife or 1-1/4" hole saw
• tape measure
• marker
CAUTION
Be safe - always wear
protective eyewear to keep
debris out of your eyes when
installing WEATHER GUARD
®
Van Products.
BOLT KIT
DESCRIPTION QTY.
Bolt, 1/4-20 x 1 1/4" hex washer head
(21-1092)
6
3/8” Spacer (21-0417) 2
Blind fastener, 1/4-20 (21-0029) 2
Adhesive backed rubber bumper 2
Washer 1/4" (21-0220) 1
Bolt, 1/4-20 x 2-1/4", black (21-0716) 1
Blind fastener installation tool (21-0711) 1