WEATHER GUARD Model 8503-3-01 Shelf Door, 15 in x 51 in - Manual (Page 2)

PAGE 2 IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US TOLL-FREE AT .800.456.7865
This LIMITED WARRANTY is made by Knaack LLC, 420 E. Terra Cotta Ave., Crystal Lake, Illinois to the original retail purchaser of KNAACK ®
Products.
KNAACK LLC WARRANTS THAT KNAACK PRODUCTS WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD
OF THREE (3) YEARS FROM DATE OF PURCHASE BY THE ORIGINAL RETAIL PURCHASER.
If, before the expiration of the Warranty period, purchaser discovers that the KNAACK Product fails to fulfill the Warranty, purchaser shall contact
Knaack
LLC to make arrangements for an inspection of the product. If Knaack LLC determines a defect exists, Knaack LLC shall, at its option and
expense, repair or replace any defective part. All Warranty repairs shall be made by an authorized KNAACK Product dealer or Knaack LLC
approved service company.
This Warranty shall not apply if the KNAACK Product has been subjected to misuse, abnormal service or handling, improper maintenance, or
alterations made by anyone other than a KNAACK Product dealer or a Knaack
LLC approved service company.
THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY DISCLAIMED.
KNAACK LLC SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY BREACH OF THIS
WARRANTY. NOR SHALL THE DAMAGES EXCEED THE RETURN AMOUNT OF THE PURCHASE PRICE PAID BY THE ORIGINAL
PURCHASER.
This Warranty is in lieu of all Warranties express or implied. The terms of this Warranty shall not be modified by any party, their successors or assigns.
This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
KNAACK LLC LIMITED WARRANTY
BOLT KIT #32-068 NOTE: Depending on your application you may end up with extra hardware after installation is complete.
Qty. Product
15 1/4-20 x 5/8" Hex Head Bolts
Qty. Product
15 1/4-20 Nylon Lock Nuts
1 Determine Shelf Door Assembly loaction
on Shelf Unit. Shelves need to be spaced
seven (7) End Panel holes apart (bolt to
bolt) for the door to fit correctly.
Place Door Assembly against the opening
between shelves and fasten hinge to the
row of shelf holes using one (1) 1/4-20 x
5/8" Hex Head Bolts and 1/4-20 Nylon
Lock Nuts per hole in hinge. The length of
the Shelf Door Assembly will determine the
number of fasteners used.
Part No. 24-0241 REV. B ECN 5305 04/13