WEATHER GUARD Model 156-3-01 Saddle Box, Steel, Compact Standard, 6.4 cu ft - Manual (Page 3)

LATCH SYSTEM
The WEATHER GUARD® Latch System utilizes automotive grade latches in conjunction with high strength latch
strikers to ensure maximum security. The WEATHER GUARD® Latch System is designed to open with a single touch
of the button, and close securely. Expect years of reliable service from the WEATHER GUARD® Latch System with
only minimal maintenance: Lubricate latch pivot points bi-annually with white grease. If latch strikers are accidentally
knocked out of alignment, simply use a mallet to re-align.
3
12V ELECTRICAL ACCESS
WEATHER GUARD® Truck Boxes are equipped with a 12 volt
electrical access grommet for easy electrical accessory -ups. To
use, simply cut along one or more perforations in the rubber grom-
met and run wire through.
LEVEL HOLDER
WEATHER GUARD® Saddle Boxes are equipped with brackets
that allow safe and easy storage of levels. Install using existing
bolts per Figure 4.
MOUNTING BRACKETS
Wide- nge mounting bolts provide secure mounting without crimp-
ing bed rails and allow full unobstructed use of side pockets.
FEATURE OPERATION (cont.)
Figure 3
Electrical Access
Install holders using
existing bols
Figure 4
To prevent electric shock, explosion, re and/or serious personal injury when using saddle/cross box with:
Extension Cord -
• Follow all Extension Cord manufacturer’s warnings and instructions.
• Do NOT insert extension cord through hole without grommet in place (see Figure 3).
• Only use a three-wire extension cord with all three prongs intact. Never remove the round grounding prong.
• Extension cord must be connected to a 120 Volt GFCI protected outlet with proper ground. If GFCI outlet is not available, use an extension
cord with GFCI protection built in.
• Check the insulation and plugs of extension cord before using. Do NOT use cord if it is worn or damaged.
• Do NOT overload extension cord.
• Remove extension cord from the grommet hole before moving or transporting saddle/cross box.
• Only use an extension cord that is rated for outdoor use.
• Do NOT connect extension cord to outlet that also supplies critical safety equipment with power.
Cordless Power Tool Battery Chargers -
• See Charger’s Owner’s Manual for proper use and care of charger and batteries. Follow all warnings and instructions provided with your
battery charger .
• Place chargers and electrical connections in tray.
• Chargers are Dry location use only. Do NOT expose to liquid, vapor, or rain. Should your charger become wet, Do NOT attempt to use.
Unplug extension cord from supply before handling wet charger or cords.
• Only use chargers and batteries that are intact and operating properly.
• Do NOT touch metal prongs when plugging charger into extension cord.
• Keep mmable materials like paper or rags away from charger, cords or connections.
• Do NOT place or attempt to charge lead acid, car type batteries in saddle/cross box.
WARNING