Satellite Maxim 2000 User Manual
Page 8
PN 16186/REV F
Page 8
7. Fasten Front Assy to Panels and Roof: (Lay Unit on its Back)
PLACE FRONT INTO POSITION AND RIVET PANELS TO FRONT USING EXPANDING
RIVETS. DO NOT RIVET THE FRONT TO THE PANELS IN THE BOTTOM HOLE ON EACH
SIDE UNTIL STEP 9. FASTEN ROOF TO FRONT USING LARGE FLANGE EXPANDING
RIVETS IN THE (2) CENTER HOLES FIRST, THEN THE REMAINING FOUR.
8. Lag Front to Base and Remove Shipping Screw:
WHEN USING BLOW MOLDED BASE USE ITEM #24 BOLT 1/4" X 1-1/2" PINCH GOLD IN
PLACE OF THE SCREW#14 X 1-1/2".
See also other documents in the category Satellite TV Accessories:
- Tufway (17 pages)
- Global (T Extrusion) (8 pages)
- Freedom (12 pages)
- High Tech 2 Flush (9 pages)
- High Rise Lift Kit (1 page)
- Maxim 3000 (8 pages)
- Global (HD Extrusion) (8 pages)
- Liberty (9 pages)
- High Rise (12 pages)
- Mondo (8 pages)
- Taurus (8 pages)
- High Tech 2 (6 pages)
- High Rise Roof (2 pages)
- Freedom 2 (old) (9 pages)
- Slimmate (1 page)
- MX2 Wet Lift (2 pages)
- Flush Western Bowl Roto Base (2 pages)
- Western Foot Flush (2 pages)
- MX3 Accessory Location (2 pages)
- MX3 Turbo SS Bowl (2 pages)
- MX3 Turbo Plst Bowl (3 pages)
- MX3 Wet Lift (3 pages)
- MX3 Turbo Foot Flush (6 pages)
- MX3 (1 page)
- Gender Indicator (1 page)
- Paperguard 3 Roll (3 pages)
- Slimmate 2 (1 page)
- Western Flush 2 (2 pages)
- Hand Flush FF Bowl (3 pages)
- Dispenser 4 Roll (3 pages)
- Tufway Accessory Location (2 pages)
- Freedom to SRO (1 page)
- Maintenance Service Truck (4 pages)
- Slide Tank (32 pages)