Satellite Flush Western Bowl Roto Base - Manual

PN 21147 REV B 11/22/11
ROTOMOLD BASE FOOT FLUSH WITH WESTERN FLUSH BOWL
ASSEMBLY INSTRUCTIONS
INTRODUCTION: Satellite portable restrooms must be assembled according to approved assembly procedures. Avoid
variations in assembly procedures which could adversely affect product life and warranty.
TOOLS: *5/16 Nut Driver Bit *Rivet Gun *Phillips Screwdriver *Flat Blade Screwdriver *#10 (3/16”) Drill Bit
*Heat Gun *2” Hole Saw *Elec/Cordless Drill *1-1/2 Hole Saw *Jig Saw
NOTE: Some of the pictures show just the Tufway parts, but the assembly is the same for all.
1. Seat Tank in Base. (Note: Make sure hoses on both ends of base assy are pulled out and not under tank). Check
tanks below to match your tank before drilling holes.
2. Drill Holes in Tanks: Drill Holes in each Corner on back side of Tanks as shown.
3. Insert hoses from Base Assy in drilled holes.