Tools – Satellite Liberty User Manual

Page 3

Text mode
Original mode

PN 18041-REV C

page 3

INTRODUCTION

Satellite portable restrooms must be assembled according to approved assembly procedures. Avoid
variations in assembly procedures which could adversely affect product life and warranty.

All references to front, left, right, and rear are
looking at the door of the unit from the outside.

Tools:

 Standard screwdriver

 Drill Electric or Cordless

 #4 Phillips Head Driver Bit

 Pop Rivet Gun

 3/8" [9.53 mm] Hex Driver bit

 1/4”( 0.250” ) [ 6 mm ] Drill bit

 #10 ( 0.193” ) [ 5 mm ] Drill bit

HELPFUL HINTS:

 Keep panels out of direct sunlight.

 Don’t open up all of your kit boxes. Open up only enough kit boxes to assemble the number of

toilets you are currently working on. KEEP PARTS ORGANIZED.



Staging parts will minimize assembly time



Keep driver as upright as possible when driving lag screws for panel to tank attachment