Bradford White ACCESSORY PACKAGES - Manual (Page 52)

Editing the Clock / Day
-52-
Figure 111
Figure 109
Hour digit(s) flashes
Figure 110
This section covers how to change the Setback Control clock, as well as the day. This may
become useful when time changes for daylight savings.
Enter Clock / Day Editing Mode
Step 1: From the Home screen, press the LEFT (Set Clock / Day) button, as shown in Figure 109.
Select Correct Hour
Step 2: Using the UP (increase hour) or DOWN (decrease hour) buttons, select the correct hour. This is
shown in Figure 110.
Lock in Correct Hour
Step 3: Press the RIGHT (Next) button to set the hour, which is shown in Figure 111.