Bradford White ACCESSORY PACKAGES - Manual (Page 37)

Setting the Setback
Control Schedule – Initial Set-up
-37-
Temperature
digits are flashing
Figure 66
Figure 67
Select the Return Period Water Temperature
Step 19: Using the UP (increase water temperature) or DOWN (decrease water temperature) buttons,
select the Return period water temperature. This is shown in Figure 66.
Lock the Return Period Water Temperature
Step 20: Press the RIGHT (Next) button to lock in the Return period water temperature, as shown in
Figure 67.
Select the Sleep Period Start Time
Step 21: Press the UP (increase time by 15 minutes) or DOWN (decrease time by 15 minutes) buttons to
select the Sleep period start time. The time increments in 15-minute intervals just as it did for the
previous periods. This is shown in Figure 68.
Hour & minutes
digits are flashing
Figure 68