Bradford White ACCESSORY PACKAGES - Manual (Page 43)

Editing the Setback Schedule
-43-
"AM"/"PM" flashes
Figure 86
Figure 85
Edit the Leave Period Start Time
Step 10: Press the UP (increase time by 15 minutes) or DOWN (decrease time by 15 minutes) buttons to
edit the Leave period start time. The time increments in 15-minute intervals just as it did for the Wake
period. This is shown in Figure 84.
Lock in the Leave Period Start Time
Step 11: Press the RIGHT (Next) button to lock in the Leave period start time, which is shown in Figure
85.
Edit AM / PM
Step 12: Next, using the UP (index AM / PM) or DOWN (index AM / PM) buttons, select AM / PM, as
shown in Figure 86.
Hour & minutes
digits flash
Figure 84