Bradford White ACCESSORY PACKAGES - Manual (Page 33)

Setting the Setback
Control Schedule – Initial Set-up
-33-
Figure 55
Select the Wake Period Water Temperature
Step 7: Using the UP (increase water temperature) or DOWN (decrease water temperature) buttons,
select the desired water temperature. This is shown in Figure 54.
Lock in Wake Period Water Temperature
Step 8: Press the RIGHT (Next) button to lock in the Wake period water temperature, as shown in Figure
55.
Select the Leave Period Start Time
Step 9: Press the UP (increase time by 15 minutes) or DOWN (decrease time by 15 minutes) buttons to
select the Leave period start time. The time increments in 15-minute intervals just as it did for the Wake
period. This is shown in Figure 56.
Figure 56
Hour & minutes
digits flash
Temperature
digits are flashing
Figure 54