Canon BJ-10sx - Manual (Page 41)

Epson LQ Mode Font Styles
4. Press the LF/FF button to confirm the change. The printer sounds
a short tone (about 0.5 second).
5. Repeat steps 3 and 4 for each font style you wish to select. This
allows you to combine several font styles.
6. Press ON LINE to set the printer on-line. The printer sounds a
long varied tone
Turning off a font style
Follow these steps to turn off a font style:
1. Make sure the printer is on-line.
2. Simultaneously press the
ON LINE and PITCH buttons. The
printer sounds a varied tone and the ON LINE indicator line
blinks.
3. Press the PITCH button the specified number of times for the font
style you want to turn off.
4. Press the LF/FF button to turn off the font style. The printer
sounds a long tone (about one second).
5. Repeat steps 3 and 4 for each font style you wish to turn off.
6. Press
ON LINE to set the printer on-line.
In Epson LQ mode, you can select between font styles of condensed and
non-condensed. Selecting condensed mode changes the character pitch
as follows:
If you have selected a character pitch of 15 cpi or proportional spacing,
the printer ignores the condensed selection.