Canon BJ-10sx - Manual (Page 114)

ESCape Sequence Differences
The following ESCape sequences cause different operations to be
performed in each emulation, IBM Proprinter X24E and Canon Bubble
Jet Printer BJ-130e.
ESCape
sequence Emulation Function
ESC : X24E
BJ-130e Set 12 cpi, Prestige mode
Set 12 cpi, Courier mode
ESC = X24E
BJ-130e Download 24-dot, font image
Download 48-dot, font image
ESC P X24E
BJ-130e Draft proportional spacing not availble
Draft proportional spacing available
ESC Q X24E
BJ-10e n = 35 or 36
n = 35 or 37
ESC [ @ X24E
BJ-130e
Shading and reverse modes are not available
Shading and reverse modes can be set with m2
ESC [ K X24E
BJ-130e
m1 is set to 0 if it is not defined
m1 is ignored if it is not defined
The printer supports the following codes in BJ-130e emulation only:
Code Function
ESC [ I Select global font
FS C B Set high resolution graphics
FS C J Set graphics line spacing