Canon BJ-10sx - Manual (Page 32)

8. Make sure you insert the top of the envelope,
transparency, or paper first. Make sure the side on which
you want to print is facing up.
NOTE: The top of the transparency is where the transparency
and its backing are attached. Always insert a transparency with
the transparency up and the backing down.
9. Press the LF/FF button to advance the envelope,
transparency, or paper one line at a time. Press FWD ADJ
or REV ADJ for fine adjustment. (See Chapter 4, Using
the Operator Panel, for details.)
10. When the envelope, transparency, or paper is positioned
correctly, press ON LINE and start your print operation.
NOTE: After printing on envelopes, transparencies, or thick
paper, set the paper thickness dial on the right side of the printer
back to the top position (paper icon) before printing on normal-
weight paper again.
Using the Printer On a Daily Basis
Follow the guidelines presented here to obtain the optimum performance
from your Bubble Jet Printer BJ-10sx.
z Canon makes numerous ink cartridges; the BC-01 is designed
specifically for the Bubble Jet Printer BJ-10sx. Therefore, use
only the BC-01 cartridge with this printer.
z After installing a new ink cartridge, always perform the print head
cleaning procedure.
z Never touch the print head on the ink cartridge or attempt to
clean it with a cloth.
z Keep the inner cover closed when printing.