Dell Dimension 8100 User Manual

Page 56

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

6 Attach the new drive to the drive bracket.

Turn the drive upside down, and fit the bracket on the drive so that the

screw holes align. To ensure proper installation, all screw holes should

be aligned and the tabs on the front of the bracket should be flush

with the front of the drive.

drive

bracket tabs (2)

drive bracket

screws (4)

To further ensure proper positioning of the drive in the computer,

insert and tighten all four screws in the order in whieh the holes are

numbered (the holes are marked "1" through "4").

5 ^ I A d d i n g P a r t s