Dell Dimension 8100 - Manual (Page 54)

4 Insert the module straight down into the eonneetor, making sure that
it fits into the vertieal guides at eaeh end of the eonneetor. Press firmly
on the ends until the memory module snaps into plaee.
If you insert the module eorreetly, the seeuring elips snap into the
eutouts at eaeh end of the module.
memory module,
cutouts (2)
securing
clips (2)
notches (2)
connector
step 4
step 3
step 2
^ HINT: If you remove a
memory module (RIM M)
you must install another
module in the empty
socket before turning on
the computer.
To remove a memory module, press out the seeuring elip at eaeh end of the
memory eonneetor until the memory module disengages from the
eonneetor.
Adding or Replacing Other Drives
Your eomputer ineludes a floppy drive and either a CD or DVD drive. You
ean add drives, ineluding Zip drives, LS-120 drives, CD-RW drives, and
additional CD drives, using the following proeedure:
1 Remove the eomputer eover (see page 42).
2 Rotate the power supply away from the system board (see page 46).
3 Remove the front panel (see page 47).
5 ^ I A d d i n g P a r t s