Casio EX-Z1000 - Manual (Page 256)

256
APPENDIX
If you have problems installing the USB
driver...
You may not be able to install the USB driver properly if you use
the USB cable to connect the camera to a computer running
Windows 98SE/98 before installing the USB driver from the
bundled CD-ROM, or if you have another type of driver installed.
This will make it impossible for the computer to recognize the
camera when it is connected. If this happens, you will need to re-
install the camera’s USB driver.
For information about how to re-install the USB driver, see the
USB driver’s “Read me” file on the CD-ROM that comes bundled
with the camera.
Display Messages
Battery is low. Battery power is low.
Cannot correct
image! Keystone correction of the image cannot be
performed for some reason. The image will be
stored as-is, without correction (page 101).
Cannot find the
file. The image you specified with the slideshow
“Images” setting cannot be found. Change the
“Images” setting (page 143) and try again.
Cannot register
any more files.
• You are attempting to save a BEST SHOT
scene when there are already 999 scenes
in the “SCENE” folder (page 97).
• You are attempting to copy a FAVORITE
file when the “FAVORITE” folder already
contains 9999 files (page 176).
Card ERROR There is something wrong with the memory
card. Turn off the camera, remove the memory
card, and then reload it into the camera. If this
message re-appears when you turn the
camera back on, format the memory card
(page 49).
• Formatting the memory card deletes all
its files. Before formatting, try transferring
recoverable files to a computer or some
other storage device.
IMPORTANT!
B