Casio EX-Z1000 - Manual (Page 254)

254
APPENDIX
Digital zoom
(including Instant
Zoom) does not
work. The zoom bar
indicates zoom only
up to a zoom factor of
3.0.
1) The digital zoom setting is turned off.
2) Date stamping is turned on.
1) Turn on the digital zoom setting (page 74).
2) Turn off date stamping (page 128). Digital zoom is
disabled while date stamping is turned on.
Movies
There is a vertical
line on the monitor
screen
Shooting a very brightly lit subject can cause a vertical
band to appear in the monitor screen image.
This is a CCD phenomenon known as “vertical smear”,
and does not indicate malfunction of the camera. Note
that vertical smear is not recorded with the image in the
case of a snapshot, but it is recorded in the case of a
movie.
Images are out of
focus.
The subject is outside the range of the camera. Shoot within the allowable range.
There is digital noise
in images.
Sensitivity is increased automatically for dark subjects,
which increases the chance of digital noise.
Use a light or some other means to illuminate the subject.
Playback
The color of the
playback image is
different from what
appears on the
monitor screen when
shooting.
Sunlight or light from another source is shining directly
into the lens when shooting.
Position the camera so sunlight does not shine directly
into the lens.
Images are not
displayed.
A memory card with non-DCF images recorded with
another camera is loaded in the camera.
This camera cannot display non-DCF images.
Problem Possible Causes Action
C