Welch Allyn ELSV-60 Light Source GE Sensing & Inspection Technologies - User Manual - Manual (Page 5)

www.ge.com/inspectiontechnologies
Light Exit /
Light Guide
Socket
Light Intensity
Control Knob
Video Out
(Composite)
Power Off
Video In
Port
(Camera) Video Out Port
(S-Video)
Power On
The ELSV-60 Hi-Lux Light Source provides high quality, white light for indus-
trial borescope and fiberscope inspections. It incorporates a patented and
field-proven lamp technology that has much greater efficiency than halogen
or xenon lamps when transferring light into a small fiber bundle, such as that
found in borescopes and fiberscopes. This greater efficiency allows the lamp
to run at only 60W, which then enables a small and lightweight light source
design. The high efficiency also enables the light source to provide high inten-
sity light without getting very hot, which is an advantage in user safety.
Video inspections are also easy with the ELSV-60. A special video channel
makes setup and operation with our BCAM 1000 C-Mount Camera simple. A
single cable connection provides power to the camera and carries the video
signal from the camera back to the light source. Video outputs carry the
signal to a monitor or other video peripheral devices for image display and/
or recording.
System Description
ELSV-60 Light Source 5