Welch Allyn ELSV-60 Light Source GE Sensing & Inspection Technologies - User Manual - Manual (Page 10)

www.ge.com/inspectiontechnologies
User Maintenance (continued)
FUSE REPLACEMENT
1. Fuse replacement must be completed with power cord disconnected.
2. Fuses are present in fuseholder. Use the same type, same rated fuse as
marked and specified to avoid risk of fire hazard.
CLEANING
WARNING: Prior to cleaning, turn power switch OFF and disconnect
the power cord from both the wall outlet and light source.
• Clean the external surfaces of the light source with a cloth dampened in a solu-
tion of mild soap and water. DO NOT IMMERSE! DO NOT GET WATER
INTO PORTS AND CONNECTORS!
• The power cord may be wiped cleaned in the same way, taking care not
to get the prongs wet. DO NOT RECONNECT POWER CORD WHILE
WET!
• DO NOT plug the ELSV-60 light source into a wall outlet until it and the
power cord are completely dry.
Fuse
10 ELSV-60 Light Source