Welch Allyn Vital Signs Monitor, Mounting Accessories - User Manual - Manual (Page 14)

10
Fuse Replacement
1. Turn the ON/OFF switch to the “OFF” position and
unplug the power cord from the wall outlet.
2. Remove the power cord from the bottom of the light
source. The fuse drawer is located directly behind
the power connector. Use your finger or a small
screwdriver and press the tab to release the fuse
drawer.
3. Replacement fuses are available from Welch Allyn,
part number 88428. The fuse is a 5 x 20 mm 250V,
2.5A, time delay. Two fuses are required. Remove
the blown fuse(s) and replace with the new fuse(s).
4. Replace the fuse drawer into the light source until it
snaps.
5. Plug the power cord into a hospital-grade wall outlet.
Replacement Parts
Warranty
One Year Limited Warranty On New
Instruments
Instrumentation purchased new from Welch Allyn, Inc.
(Welch Allyn) is warranted to be free from original
defects in the material and workmanship under normal
use and service for a period of one year from the date of
first shipment from Welch Allyn. This warranty shall be
fulfilled by Welch Allyn or its authorized representative
repairing or replacing at Welch Allyn’s discretion, any
such defect, free of charge for parts and labor.
Welch Allyn should be notified via telephone of any
defective product. In the even that the product needs to
be returned, the unit should be securely packaged and
postage prepaid to Welch Allyn. Loss or damage in
shipment shall be at purchaser’s risk.
Welch Allyn will not be responsible for loss associated
with the use of any Welch Allyn product that (1) has had
the serial number defaced, (2) has been repaired by
anyone other than an authorized Welch Allyn Service
Representative, (3) has been altered, or (4) has been
used in a manner other than in accordance with
instructions.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY
IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR PARTICULAR PURPOSE, OR OTHER
WARRANTY OF QUALITY, WHETHER EXPRESSED OR
IMPLIED. WELCH ALLYN WILL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
If you have questions regarding any Welch Allyn
products, please call Customer Service at (800) 535-
6663, 315-685-4100, or FAX:315-685-4653
Service
Customers with instruments requiring service
should contact the Welch Allyn Technical Service
Department at (800) 535-6663, 315-685-4100, or
FAX:315-685-4653.
Part REF Quantity
Lamp 04050 1
Fuse 88428 Pkg. of 4