beautypg.com

Electrical specifications, Environmental specifications – Welch Allyn Connex ProBP 3400 digital blood pressure device - User Manual User Manual

Page 58

background image

Electrical specifications

Power requirements:

Input: 100-240VAC, 0.18A, 50-60Hz
Output: 5VDC, 0.5A

Degree of protection:

Type BF applied part

Safety classification:

Class II

Internally powered:

Battery, lithium-ion type, 3.7V, 2100mAh, 7.8Wh

Protection against the ingress of water:

IPXØ

Safety mode of operation:

Continuous operation

Standards:

This device complies with the following standards:
EN/IEC 60601-1
EN/IEC 60601-1-2
EN 1060-1:1996 Specification for non-invasive

sphygmomanometers - Part 1: General requirements
EN 1060-3:1997 Specification for non-invasive

sphygmomanometers - Part 3: Supplementary requirements for

electro-mechanical blood pressure measuring systems
FCC Subpart 15C
FCC ID #PI4411B, IC 1931B-BTM411

Environmental specifications

WARNING Fire and explosion hazard. Do not operate the device in the presence

of a flammable anesthetic mixture with air, oxygen, or nitrous oxide; in oxygen-

enriched environments; or in any other potentially explosive environment.

Caution Use the device within stated operating temperature ranges. The device

will not meet performance specifications if used outside these temperatures

ranges.

Operating temperature

10°C to 40° C (50° to 104° F)

Storage temperature

-20°C to 50° C (-4° to 122° F)

Operating altitude

-170 to 4877 m (-557 to 16,000 ft.)

Storage humidity

15 to 95% (noncondensing)

52 Specifications

Welch Allyn Connex® ProBP™ 3400 digital blood pressure device