Welch Allyn Connex ProBP 3400 digital blood pressure device - User Manual - Manual (Page 34)

Mount the device
For mounting instructions, see the accessory's directions for use.
For mounting options, see the ProBP 3400 approved accessories in the Appendix.
Assemble power cord and wall plug/line cord
1. Align the grooves and two prong plug in the wall plug or line cord with the casing and plug
receptacle located on the transformer.
2. Slide the wall plug or line cord onto the transformer until it is firmly seated.
Charge the ProBP 3400
To charge the device:
1. Insert the USB B connector into the USB/external power connection port on the back of the
device.
2. Insert the other end of the USB cord into USB connector on the power transformer, then plug
the transformer into the main power source.
Initial startup
To complete initial configuration, you must turn on the device, and select an operating language,
date, and time.
1. Press the Power on/power off button. After device power up, the display window shows
the Language screen.
2. Use the Up and Down navigation buttons to highlight the correct option.
3. Press the Select button to choose a language. A confirmation window displays your language
selection.
Set date and date format
After you select a language, set the device Date and Date format:
1. The Date format field is highlighted. Press the Up navigation or Down navigation buttons
to access the correct format option.
2. Press the Select button to accept the date format as shown.
3. Press the Down navigation button to highlight the date.
4. Press the Select button. The first numeric field is highlighted for editing.
5. Use the Up navigation button to increase the number value; use the Down navigation
button to decrease the number value.
6. Press the Right navigation button to move to the next field.
7. Repeat steps 5 and 6 to edit additional numeric values.
8. Press the Right navigation button to highlight the OK button.
9. Press the Select button to accept the date as shown.
10. Press the Down navigation button to highlight the Next button.
11. Press the Select button to move to the Time and Time format screen.
28 Setup Welch Allyn Connex® ProBP™ 3400 digital blood pressure device