Vinten Radamec HS-2010MED Pan & Tilt Head - Manual (Page 38)

HS-2010MED Installation
3-2 User Manual
Introduction
This chapter focuses on the mechanical aspects of unpacking the head(s),
mounting the heads on the pedestals (or tripods or other mounts), mounting and
balancing the camera and payload.
TO PREVENT PERSONAL INJURY, AND FOR PROPER
PERFORMANCE OF THE EQUIPMENT IT IS ESSEN-
TIAL THAT THE PROCEDURES IN THIS MANUAL ARE
FOLLOWED EXACTLY.
DO NOT ATTEMPT TO LIFT OR MOUNT THE HS-
2010MED HEAD UNLESS YOU HAVE AT LEAST ONE
OTHER PERSON TO HELP YOU.
Tools You Will Need
You will need the following tools during the unpacking and installation:
• 9/16” open end wrench
• A set of hex keys