Vinten Radamec HS-2010MED Pan & Tilt Head - Manual (Page 15)

HS-2010MED Safety & Introduction
User Manual 1-5
Any failure of the system could possibly cause one or more axes to move on
their own, but the speeds and forces should not be noticeably greater than those
encountered during normal use.
Power Switch
If you need to disable a head in an emergency, or for any other reason, use the
Power Switch on the side of the head
After clearing the cause for the emergency, or completing the maintenance task,
turn the Power Switch back on.
Pinch Points
Particular care should be exercised around possible points where you could get
pinched, such as the tilt cradle. Here, the forces can be somewhat greater, due to
the short lever arm.
Sharp Edges
If the lens, teleprompter or other camera attachments have sharp edges that
could cause injury, make sure they are padded or protected.