Vinten Radamec HS-2010MED Pan & Tilt Head - Manual (Page 29)

HS-2010MED Operation
User Manual 2-5
Power Switch
The power switch on the head enables or disables all of the electronics in the
head. Turn the power off when you are working on the head or associated equip-
ment. The power switch can also be used to disable the head in an emergency.
Turning The Head On
WARNING: ALWAYS turn on the HS-2010MED power with
the head set for Robotic mode of operation.
Make sure that the controller and servo pedestal (if installed) are turned on and
initialized before you turn the head on.
Power Switch
(Up = | = On)
(Down = O = Off)