Vintage Cellars CC-CX8800 - Manual (Page 30)

Page 28 | 1-855-235-5271 CX 012014
1. Product.
2. This limited warranty is voided if installed in an enclosure of insufficient design that does not follow the
Product installation requirements stated herein and in the owner’s manual.
3. Removing the rivets from the Product’s unit housing without prior authorization from CellarCool voids this
limited warranty.
4. The End User must first contact CellarCool Customer Service by telephone (at 1-800-343-9463) prior to
attempting service on any Product still under the limited warranty; else the limited warranty is voided.
5. This limited warranty does not cover Product being concealed by, but not limited to, vegetation, fabric,
shelving, mud, snow, or dirt. Product must not be painted or limited warranty will be void.
6. This limited warranty does not cover exposure to corroding environments such as, but not limited to,
petroleum and gasoline products, cleaning solvents, caustic pool chemicals, and marine air.
7. This limited warranty does not cover any cause not relating to Product defect.
8. THE REPAIR OR REPLACEMENT OF THE PRODUCT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE
EXCLUSIVE REMEDY OF YOU, THE END USER, AS WELL AS ANYONE ELSE IN THE CHAIN OF TITLE OF THE
PRODUCT, DOES NOT START A NEW LIMITED WARRANTY TIME PERIOD, AND IS IN LIEU OF ALL OTHER
WARRANTIES (EXPRESS OR IMPLIED) WITH REGARD TO THE PRODUCT. IN NO EVENT SHALL CELLARCOOL
BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR CONTINGENT DAMAGES FOR BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED. Some states do not allow the
exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you
specific legal rights, and you may have other rights, which vary from state to state.
9. Failure of the End User to comply with all of the Product Installation Requirements, Maintenance Requirements
and End User Requirements may, at CellarCool’s sole discretion, void this limited warranty.
10. No one has any authority to add to or vary the limited warranty on this Product.
3. Product Installation Requirements:
A. Prior to installing a CellarCool Product, the End User must read the CellarCool Owner’s Manual and thereafter the End
User must follow the required installation, use and maintenance procedures set forth by CellarCool in CellarCool’s
Owner’s Manual. The Owner’s Manual is shipped with each Product and if another copy is needed, replacement
copies can be downloaded from CellarCool’s website (www.cellarcool.com) or by contacting CellarCool directly for a
new copy of the Owner’s Manual.
B. It is highly recommended that the End User obtain the assistance of a wine storage professional.
C. Failing to address all of the variables associated with proper installation will cause the Product to operate incorrectly
and limit both the Product’s ability to cool and the longevity of the Product itself.
D. The End User is responsible for all risks and costs of installation of the Product, including but not limited to all labor
costs as well as cost of any additional parts required for the proper and complete installation of the Product. The End
User is responsible for all risks and costs of removing the Product if limited warranty work is required.
E. The Product cannot operate at its optimum capacity if airflow is constricted by ducting or venting the exhaust side of
the Product into a location with inadequate ventilation.
4. Maintenance Requirements
It is the End User’s responsibility to clean off any accumulated dust, lint, or other debris from the front and rear intake
grills; failure to do this on a regular basis will restrict the airflow and may affect the Product’s ability to function properly.
Periodically cleaning the Product’s vents will help assure maximum cooling efficiency. The drain tube must also be
checked and kept clean and free of debris and mold to maintain proper performance.
Mold is a natural living organism in the environment. It exists in the air in the form of microscopic spores that move
in and out of buildings through doors, windows, vents, HVAC systems and anywhere else that air enters. Once it is
discovered, mold must be addressed quickly and appropriately. Delayed or improper treatment of mold issues can