Vetter SP 60 - Manual (Page 8)

Vetter Safety Cushion SP 60
Page 7/30
Leader
MT 236 H*
High power blower -
petrol
Art. No. 1530019300
Capacity
m³/h 43,100
cfm
25,372
Noise level dB 91
Operating pressure
bar
-
psi
Motor
6,5 PS Honda -
4 stroke
Running time (with
the tank full)
100 min.
Dimensions, approx.
mm 550 x 548 x 492
inch 21.7 x 21.4 x 19.2
Weight, approx.
kg 42
lbs 93
*Note: Only Leader blowers are to be used which have been supplied by Vetter!
2.4 Ambient conditions and limits
The assembly location is mainly dependent on the operational si-
tuation and the local conditions.
The assembly area should, as far as possible, be free of sharp ob-
jects or objects which could puncture.
The safety cushion is to be protected against heat.
2.5 Safety instructions
The main condition for reliable operation of the VETTER safety
cushion is an exact knowledge and adherence to these operating
instructions and safety information.
In addition to this, it is imperative to observe the valid regulations
and stipulations for accident prevention.
Only trained fire service staff are permitted to carry out operati-
on.
Jumping for exercises or shows is strictly forbidden!
Only special drop objects, such as sand bags or dummies, are to
be used for exercising and testing!
Drop objects with a weight mass of 50 kg dropped from a height
of maximum 60 m
MT 236 H