Vetter SP 60 - Manual (Page 13)

Page 12/30
Leader blowers
In order to use the Leader brand of blower it must be ensured that
they are equipped with special adapters (contained in the delive-
ry package of the blower). Place the adapter on the opening and
turn counter-clockwise until it locks. The inflation hoses of the sa-
fety cushion are then fixed via a snap-in coupling.
Lay the inflation hoses with the eyes over the pins and then tensi-
on the snap-in coupling with the ratchet until the inflation hoses
are solidly connected with the adapters.
Finally ensure that all 4 eyes lay on one pin thus ensuring stabili-
ty.
Make certain that the hoses are solidly
connected to the blower!
4. Operating instructions
4.1 Safe operation
The safety cushion is to be erected so that only vertical jumps can
be made. If possible, the person jumping should not jump into the
cushion in the upright position but in the supine position. Never
ask the person to be rescued to jump at an angle.
After each jump it may be necessary to realign the safety cushion.
The safety cushion must only be lifted and moved using the posi-
tioning loops.
For safety and life duration reasons, any dragging across rough is
to be avoided.