Vetter SP 60 User Manual
Page 11
Page 10/30
Place the packing cover behind the rolled up safety cushion. Roll
the safety cushion onto the packing cover and after this place the
hoses together on the roll.
Then fold the sides of the packing cover in the sequence shown
over the rolled up safety cushion.
Finally secure with the belts and adjust them to the correspon-
ding tension with the tension device.
After this, the safety cushion can be stored on a vehicle.
3.4
Safety measures before use
Only extension cables or cable drums of suitable size for the corre-
sponding current load are to be used (see „type label“). The cable
should have a minimum cross section of 3 x 2.5 mm² and be a
maximum of 100 m in length.