Vetter SP 60 - Manual (Page 15)

Page 14/30
The safety cushion is available for further jumps only after the per-
son who jumped has left the cushion and also after it completely
realigns again.
4.3 Exceptional situations
If the position of the safety cushion shifts due to the previous jump
then the safety cushion as well as the blower are to be realigned.
Switch the blower off immediately if you hear abnormal noises in
addition to the noises that are similar to those of a turbine. In this
case please inform the manufacturer immediately.
4.4 After operation
Remove the safety cushion out of the danger zone and deflate it
in a freely open space.
Switch off the blower in order to do this. The safety cushion auto-
matically deflates on its own and lays flat on the ground.
Fold up the safety cushion according to the packing plan.
Let the blower cool off before storing it.
4.5 Maintenance, repair and cleaning after every
operation period
Safety cushions:
Cleaning
The safety cushion can be cleaned with warm water or soap suds.
Do not use aggressively acting cleaning agents or sol-
vents!
Completely rinse off soap subs with clear water. Dry the safety
cushion at normal room temperature.
Storage
The safety cushion must only be stored in a dry room after cleaning
and drying. The safety cushion is to be stored in the packing co-
ver after it has been folded together according to regulations. No
other objects are to be stored on top of the safety cushion.
The material of the safety cushion is of course subject to natural
aging.
The life duration of the product is greatly influenced by such fac-
tors as external effects, storage conditions, how often it is used
and the type of use.
Optimum storage temperature (min. to max.): -20 °C to +50 °C