Vetter SP 60 - Manual (Page 18)

Vetter Safety Cushion SP 60
Page 17/30
Authorization must be made in writing.
This authorization is valid for a maximum period of 60 months
and can, after registration and training, be extended.
The specialist or the inspection institute in which he is employed,
must have the necessary testing devices for the scope of the ins-
pection.
for the Main Safety Inspection
The General Safety Inspection is to be exclusively carried out by
the manufacturer
6.1 Inspection deadlines
1st Year Annual Inspection 9th Year Annual Inspection
2nd Year Annual Inspection 10th Year General safety inspection
3rd Year Annual Inspection 11th Year Annual Inspection
4th Year Annual Inspection 12th Year Annual Inspection
5th Year Main safety inspection 13th Year Main safety inspection
6th Year Annual Inspection 14th Year Annual Inspection
7th Year Annual Inspection 15th Year Disposal
8th Year Main safety inspection
Should there be any doubt about safety or reliability then a Gene-
ral Safety Inspection must be arranged with the manufacturer.
The life period of the safety cushion is limited to 15 years due to
product reliability and safety.
After this life period, the safety cushion must not be used
for exercises or any other purposes.
6.2 Inspection regulations and certification
The individual inspections, such as the annual visual and function
inspection, are to be carried out according to the inspection inst-
ructions in the operating manual.
A test report is to be made about the inspection carried out (copy
the corresponding page if required).
The inspections carried out are to be entered into an inspection
log book (contained in the standard delivery package) as well as
on the safety cushion itself.