Rice Lake Weigh Modules/Mount Assemblies - Manual (Page 41)

WEIGH MODULES
2-12
Double-Ended Beams
Typical Application
Typical applications for the SURVIVOR 2100HE include heavy-
capacity tanks, blenders, reactors, and bulk inventory manage-
ment.
Figure 2-23: SURVIVOR 2100HE
in heavy-capacity application
SURVIVOR ® 2100HE Modules
These medium- to heavy-capacity modules are available in two
sizes in capacities ranging from 20,000-100,000 lb. The SURVIVOR
2100HE uses a double-ended shear beam load cell and is ideally
suited for tanks, hoppers, and reactors that are subject to harsh,
hostile environments. This module provides superior corrosion,
moisture ingress, and mechanical protection. In the majority of
applications, the assemblies are self-checking and held captive
with no need for check or stay rods. The load cells are each
waterproof guaranteed and NTEP certified, 1:5000 division class
III, yielding up to 0.02% total error.
Allowable Movement
Figure 2-22 illustrates the 2100HE module’s capability to handle
movement.
Figure 2-22: SURVIVOR 2100HE
Construction and Features
1) IP67 environmental rating is guaranteed against moisture
damage.
2) Design transmits the load with a sliding pin on the load
bearing groove of the cell to allow for thermal expansion/
contraction with little friction.
3) Tolerates eccentric loads and side loads of up to 100% of
capacity.
4) Teflon ® -lined cable is standard for high temperature and
maximum chemical resistance.
5) All modules come standard in stainless steel.
6) Internal lift-off protection and checking eliminates extrane-
ous hardware.
7) Standard conduit adaptor is included for added protection.