Rice Lake Survivor 390HE Hostile Environment Digital Indicator - Manual (Page 31)

Print Formatting 27
7.0 Print Formatting
The 390HE provides three print formats, GFMT,
NFMT, and CFMT that determine the format of the
printed output when the
PRINT
key is pressed or when
a KPRINT EDP command is received. If no tare has
been entered, the GFMT print format is used; if a tare
has been entered, NFMT is used; in counting mode,
CFMT is used.
Each print format can be customized to include up to
300 characters of information, such as company name
and address, on printed tickets. You can use the
indicator front panel (PFORMT menu), EDP
commands, or the Revolution
™ configuration utility to
customize the print formats.
7.1 Print Formatting Commands
Table 7-1 lists commands you can use to format the
gross and net print formats. Commands included in
the format strings must be enclosed between < and >
delimiters. Any characters outside of the delimiters
are printed as text on the ticket. Text characters can
include any ASCII character that can be printed by the
output device.
The default GFMT and NFMT print formats use only
the new line () command and the commands for
gross, net, and tare weights in displayed units (,
, and ).
The default 390HE print formats are shown in
Table 7-2:
NOTES:
• The , , and commands listed
in Table 7-1 print the gross, net, and tare
weights in non-displayed units—that is, in the
units not currently displayed on the indicator.
In count count mode, formatting commands for
displayed units (, , ) use primary
units, non-displayed units commands (,
, ) use secondary units.
• ID numbers included in the print format string
( command) must be set using the UID
EDP command.
• The 300-character limit of each print format
string includes the output field length of the
print formatting commands, not the command
length. For example, if the indicator is
configured to show a decimal point, the
command generates an output field of 13
characters: the 10-character weight value
(including decimal point), one space, and a
two-digit units identifier.
7.2 Customizing Print Formats
The following sections describe procedures for
customizing the GFMT, NFMT, and CFMT formats
using the EDP port, the front panel (PFORMT menu),
and the Revolution configuration utility.
Command Description
Gross weight in displayed units
Gross weight in non-displayed units
Net weight in displayed units
Net weight in non-displayed units
Tare weight in displayed units
Tare weight in non-displayed units
Current piece count
Unit identifier
Consecutive number
nn> New line (nn = number of termination (
or ) characters)*
nn> Space (nn = number of spaces)*
Toggle weight data format
(formatted/unformatted)**
Gross, net, and tare weights are 10 digits in length, including
sign, followed by a space and a two-digit units identifier.
Total field length with units identifier is 13 characters.
ID and consecutive number (CN) fields are 1–6 characters in
length, as required.
* If nn is not specified, 1 is assumed. Value must be in the
range 1–99.
Table 7-1. Print Format Commands
** After receiving an SU command, the indicator sends
unformatted data until the next SU command is received.
Unformatted data omits decimal points, leading and trailing
characters.
Format Default Format String Sample Output
GFMT GROSS 2046.81 LB GROSS
NFMT GROSS
TARE
NET 4053.1 LB GROSS
15.6 LB TARE
4037.5 LB NET
CFMT PIECES 512 PC PIECES
NOTE: In OIML and CANADA modes, the letters PT (preset
tare) are automatically inserted after the printed tare weight.
Table 7-2. Default Print Formats
Command Description
Table 7-1. Print Format Commands