Rice Lake OB-350 Loadrunner Series Onboard Weight Indicator - Manual (Page 14)

10 OB-350 Operators Manual
Options Modes Select weighing mode to be displayed - Net. Gross or Net & Gross.
Load/Chan Load function gives the option to accumulate the amount of load (weight) delivered or
collected from site.
Channel Function - Split screen function is added to the MENU screen (for semi trucks only).
RS-232 Select or change RS-232 output option.
Count Select count by in lb - 1, 2, 5, 10, 20, 50, 100, 200,
Z/Func Allows operator access to Zero/Tare function on the display.
Inc For use with roll off systems and dump trucks, turn on to calibrate zero degrees of
inclinometer.
Configuration Input 1(F)
Input 2 (R)
Split
CAN Air/Oil pressure transducer or load cell setting based on truck type.
Air/Oil pressure transducer or load cell setting based on truck type.
Setting varies depending on input 1/input 2 values.
Not Used
Calibration Tare
Zero
Span Entry of empty vehicle weight for gross weight calculation.
No load zero calibration.
Entry of load for span calibration.
System Pin
PUK
Clock Enter a password.
Not Used.
Change system time and date.
User and Setup Menu
Parameter Choices Description