Rice Lake Mobile Group Animal Scale - MAS-M - Operators Manual - Manual (Page 43)

Maintenance 39
5.7 Towing Checklist
Each item of checklist to be reviewed and list to be signed by dealer and customer at
delivery.
[ ] Operator Safety section of manual has been reviewed.
[ ]
Scale is not intended for the transport of livestock or any other
goods or materials.
[ ] Ball on towing vehicle must be 2”
[ ]
Hitch height of towing vehicle must be between approximately
16” above the ground such that the scale is in towing level.
[ ] Safety chains must always be connected during towing.
[ ] Towing vehicle must be wired correctly (see label on hitch)
[ ] Magnetic lighting package must be on the scale during towing.
[ ]
Scale is equipped with electric brakes and must be
synchronized. See synchronization procedure in manual.
[ ]
Scale is designed to be towed at a ride height indicated by
labels
on the suspension shock absorbers. Towing at ride heights
outside of the indicated range may result in suspension damage.
[ ] Suspension stops must be in the transport position during towing.
[ ]
Converting the scale from weigh mode to transport mode and
back to weigh mode has been reviewed.
[ ] Safety pins are installed in all the hitch pins.
[ ]
Dexter recommends to re-torque wheel lug nuts at 10, 25 and
50
miles.
Buyer ________________________Date___________________
Dealer ________________________
Copy to be retained by dealer
Fax copy to manufacturer: Fax #: 715-234-6967