Rice Lake Mobile Group Animal Scale - MAS-M - Operators Manual - Manual (Page 19)

Assembly 15
2.4.1 Hitch Assembly
1. If the hitch arm does not come mounted, assemble the right hitch member (with
coupler) to the cage using the pin installed in the hole. Ensure the clip pin is
installed on the bottom of the pin.
2. Connect the two halves of the hitch and install the forward pin through both left
and right hitch members.
3. Install the safety chains as shown in Figure 2-8.
Figure 2-8. Safety Chain
4. Assemble jack, tighten bolts.
5. Install power cable and connect breakaway switch.
6. Connect the slip hook with the safety latch onto one end of each chain.
7. Install the quick link into the 4th link of the chain on the opposite end of the slip
hook.
8. Insert the quick link into the bottom hole on the hitch mounting plate.