Rice Lake 120 Digital Weight Indicator - Manual (Page 17)

Configuration 13
Level 3 submenus
Primary Units (PRIMAR Parameter)
DECPNT 888888
8.88888
88.8888
888.888
8888.88
88888.8 Decimal point location. Specifies the location of the decimal point or dummy zeroes in the
primary unit display. Value should be consistent with local legal requirements.
DSPDIV 1D
2D
5D
10D
20D
50D Display divisions. Selects the minimum division size for the primary units displayed weight.
UNITS LB
KG
OZ
TN
T
G
NONE Specifies primary units for displayed and printed weight. Values are: LB=pound;
KG=kilogram; OZ=ounce; TN=short ton; T=metric ton; G=gram.
Secondary Units (SECNDR Parameter)
DECPNT 88888.8
888888
8.88888
88.8888
888.888
8888.88 Decimal point location. Determines the location of the decimal point or dummy zeros in
the secondary unit display.
DSPDIV 5D
10D
20D
50D
1D
2D Display divisions. Selects the value of minimum division size of the displayed weight.
UNITS KG
OZ
TN
T
G
LB
NONE Specifies secondary units for displayed and printed weight. Values are: KG=kilogram;
OZ=ounce; TN=short ton; T=metric ton; G=gram; LB=pound.
MULT 0.45359
number Multiplier. Specifies the conversion factor by which the primary units are multiplied to
obtain the secondary units. The default is 0.45359, which is the conversion factor for
changing pounds to kilograms. Use the MULEXP parameter to shift the decimal position
of the multiplier. See Section 7.5 on page 33 for a list of multipliers.
To toggle between primary and secondary units, press the UNITS key.
MULEXP dec_position Multiplier decimal shift. Specifies a divisor used to shift the decimal position in the
secondary units multiplier value. Use the left and right arrow keys to shift the decimal point
within the displayed MULT value.
FORMAT Menu
Parameter Choices Description
Table 3-3. Format Menu Parameters (Continued)