ProgressiveRC 8 PowerLab - Manual (Page 56)

Run multiple CCS instances
You can run multiple instances of CCS on one computer to support multiple PowerLabs.
Here’s how:
1. Connect the first PowerLab 8 to the computer using an FUIM3.
2. Launch
CCS. Waiting to Start should appear at the top of the CCS window.
3. Connect the next PowerLab 8 to the computer using another FUIM3.
4. Launch CCS again (this will be the second instance). Waiting to Start should appear
at the top of the CCS window.
Configuration D and Configuration G in the “Connect packs: advanced” section show
wiring that supports multiple CCS instances.
56