Cabletron Systems SEHI-22FL - Manual (Page 71)

Chapter 7: Local Management
7-22 SEHI User’s Guide
PORT ADMIN. STATUS
Displays the administrative status of the port selected. The two possible
status messages are Enable or Disable.
PORT SEG. STATUS
Displays the segmentation status of the port selected. The two possible
status messages are Segmented or Unsegmented. The SEHI and SEH
automatically partition problem segments, and reconnect non-problem
segments to the network.
ENABLE PORT
This command lets the user enable the selected port.
DISABLE PORT
This command lets the user disable the selected port.
UPDATE-FREQ
This command lets the user select the time interval between
Stack/Module/Port counter updates. Choose update intervals up to 99
seconds in increments of 3 seconds.
MODULE
This command lets the user view statistics for a selected module in the
stack. The SEHI is Module 1 and each SEH in the stack follows in
sequential order. Figure 7-9 shows each module number in the stack.
Figure 7-9 Module Number Sequence
SEH - MODULE 5
SEH - MODULE 4
SEH - MODULE 3
SEH - MODULE 2
SEHI - MODULE 1
1490_28
SEHI Book Page 22 Friday, April 19, 1996 10:46 AM