Equipment you need to set up your system, 2 equipment you need to set up your system – Kontron SYMKLOUD MS2900 Web User Manual
Page 6
6
www.kontron.com
Quick Start Guide
1.2 Equipment You Need to Set Up Your System
Figure 1 shows what you will need to get started. For instructions on how to install these components, see
Chapter 2, ‛Getting Started‛.
Depending on what you ordered for your new SYMKLOUD MS2900 system, you may have various cables,
accessories, or spare components with your shipment. For purposes of accomplishing the tasks described in
this guide, which is aimed at getting you up and running, you only need the following items from the box:
»
The MS2900 system with any protective plastic or Styrofoam packaging removed
»
The two rails that attach to the system chassis so it can be mounted in a cabinet/rack
»
The RJ-45 to DB-9 adapter for use with a console connection
You may also need to supply the following equipment:
»
Standard RJ-45 CAT5 cable (or better)
»
An Internet connection
»
The power cord(s) for your system: AC or DC, depending on what you ordered and if you have one
power supply unit (default) or an optional redundant power supply also
NOTE: The DC power supply ships with a mating connector that you will need to attach to the rear panel
before you power up the platform.